FWIW: I will wait for the Release because @mwilliams told me a few months ago that the upcoming Release will be rolled out with 15.4..
Upgrade Appliance to opensuse 15.4
thank you for the answer - then I am more relaxed when it is on the radar anyway.
2 months later
Ich habe zufällig festgestellt, dass es nun die notwendigen Pakete gibt. Ich habe das Update auf 15.4 durchgeführt und konnte bisher keinen Fehler feststellen.
Weiß jemand, seit wann das Update zur Verfügung stand? An mir war es vorbeigegangen.
crpb Das ist jetzt kein vorschlag sondern nur ein Fakt!
Nach einem zypper dup hat wieder alles funktioniert.
There wasn't any official statement but i guess it's now somewhat Stable.
Will open a Ticket and report back.
I find it critical that there is no info - leap 15.3 support ends with the end of december and that's why a statement would be exciting what happens here. especially in terms of security, there is still a lot to be done here, as it looks, even microsoft is more transparent.
7 days later
ak4020 Tomorrow your wish comes true, however, that stated, packages for 15.4 are available since > 6 months, just not the "install from scratch" appliance. documentation on how to upgrade will surface shortly after release, so you'll be in time 
.
7 days later
Hello,
I want to ask if there exist any manual or things to pay attention when doing the Upgrade?
Concrete:
When I do a zypper dup (after zypper ref && zypper up of course) I get the following:
Problem: problem with the installed dracut-kiwi-lib-9.24.23-lp153.1.1.x86_64
Problem: problem with the installed dracut-kiwi-live-9.24.23-lp153.1.1.x86_64
Problem: problem with the installed dracut-kiwi-oem-dump-9.24.23-lp153.1.1.x86_64
Problem: problem with the installed dracut-kiwi-oem-repart-9.24.23-lp153.1.1.x86_64
Problem: problem with the installed kiwi-systemdeps-bootloaders-9.24.23-lp153.1.1.x86_64
Problem: problem with the installed kiwi-systemdeps-core-9.24.23-lp153.1.1.x86_64
Problem: problem with the installed kiwi-systemdeps-disk-images-9.24.23-lp153.1.1.x86_64
Problem: problem with the installed kiwi-systemdeps-filesystems-9.24.23-lp153.1.1.x86_64
Problem: problem with the installed kiwi-systemdeps-iso-media-9.24.23-lp153.1.1.x86_64
Problem: problem with the installed kiwi-tools-9.24.23-lp153.1.1.x86_64It then asks vor every packet like this:
Problem: problem with the installed dracut-kiwi-lib-9.24.23-lp153.1.1.x86_64
Solution 1: install dracut-kiwi-lib-9.24.43-150100.3.56.3.x86_64 from vendor SUSE LLC <https://www.suse.com/>
replacing dracut-kiwi-lib-9.24.23-lp153.1.1.x86_64 from vendor obs://build.opensuse.org/Virtualization:Appliances
Solution 2: keep obsolete dracut-kiwi-lib-9.24.23-lp153.1.1.x86_64I also noticed since some time when I do zypper up it always says:
The following 10 package updates will NOT be installed:
dracut-kiwi-lib dracut-kiwi-live dracut-kiwi-oem-dump dracut-kiwi-oem-repart kiwi-systemdeps-bootloaders
kiwi-systemdeps-core kiwi-systemdeps-disk-images kiwi-systemdeps-filesystems kiwi-systemdeps-iso-media kiwi-tools
So its the same packages. Should I replace the packets from vender SUSE LLC or is there something else to do?
Thank you and
Greetings
tf91 to cleanup / solve this issue, run this command:
rpm -e dracut-kiwi-lib dracut-kiwi-live dracut-kiwi-oem-dump dracut-kiwi-oem-repart kiwi-systemdeps-bootloaders kiwi-systemdeps-core kiwi-systemdeps-disk-images kiwi-systemdeps-filesystems kiwi-systemdeps-iso-media kiwi-tools
FYI: this packages are not needed for grommunio.
- Edited
crpb Nach einem zypper dup hat wieder alles funktioniert.
Sadly it doesn't work anymore like it did two weeks ago. Did try an Upgrade of my actual System which just broke it.
After that i tried the ova 2022.12.1 which was a bit odd with the different $repoversions. At least i upgraded it to 15.4 but haven't tried an actual installation yet as stuff like this is still a bit icky..
grommunio-2022121:~ # rpm -q -f /etc/php7/fpm/php-fpm.d/pool-grommunio-*
grommunio-dav-1.1.32.71acf2d-lp154.8.1.noarch
grommunio-sync-1.1.49-lp154.54.1.noarchAnd grommunio-dav is currently also broken and i'm not alone
That's actually still on 15.3..
gromi:~ # _grom_versions
grommunio-admin-api 1.9.19.ffb31e8
grommunio-admin-common 6.cb985db
grommunio-admin-web 2.6.0.30.3a13674
grommunio-antispam 3.4
grommunio-common 10.e94d08a
grommunio-cui 1.0.233.d95a532
grommunio-dav 1.1.32.71acf2d
grommunio-dav 1.1.32.71acf2d
grommunio-dbconf 1.1.1.da20a46
grommunio-error-pages 1.0.6.9c50afb
grommunio-imapsync 2.200
grommunio-index 0.1.14.f713867
grommunio-release 2022.05.2
grommunio-setup 1.0.67.98c18be
grommunio-sync 1.1.49
grommunio-web 3.1.141.491f865
gromox-debuginfo 1.37.82.4a94326
gromox-debugsource 1.37.82.4a94326
gromox 1.37.82.4a94326
grub2-theme-grommunio 1
libHX32 4.8
libexmdbpp0 1.10.0.3a4d93b
libfmt8 8.1.1
libgumbo1 0.10.1
libpff1 20211114
libtinyxml2-9 9.0.0
libvmime-suse5 0.9.2.175
mapi-header-php 1.0.1.705eff3
nginx-module-brotli 1.0.0rc+g1
nginx-module-vts 0.2.1+g1b
patterns-grommunio 1
perl-Authen-NTLM 1.09
perl-Encode-IMAPUTF7 1.05
perl-JSON-WebToken 0.10
perl-Sys-MemInfo 0.99
plymouth-theme-grommunio 1
prosody 0.11.13
python3-jsonschema 3.2.0
python3-lazy-object-proxy 1.2.2
python3-mattermostdriver 7.3.2
python3-more-itertools 8.12.0
python3-openapi-core 0.13.7
python3-openapi-schema-validator 0.1.5
python3-openapi-spec-validator 0.2.9
python3-pamela 1.0.0
python3-parse 1.19.0
python3-pyexmdb 1.10.0.3a4d93b
python3-rfc3339-validator 0.1.4
python3-strict-rfc3339 0.7
system-user-grodav 2
system-user-grommunio 2
system-user-gromox 2
system-user-grosync 1
system-user-groweb 2
systemd-presets-branding-grommunio 2022.12Wait with the update, grommunio will provide update instructions in near future.
- Edited
Joa, ich warte bis die Pakete gefixt sind. Dann kann ich es noch mal probieren :-).
Ist ja auch alles "gesichert" von daher kann nicht viel schief gehen.
35 1,5,9,13,17,21 * * * /bin/sh -c '/root/bin/grombak 2>&1 | systemd-cat -t grombak -p 5'PS: Ja, ich vertraue worseFS nicht so wirklich...
a month later
- Edited
Are the any news for the upgrade?
If I replace 15.3 with 15.4 in repo files I have unresolved dependencies:
vm3:~ # zypper lr -u
Repository priorities are without effect. All enabled repositories share the same priority.
| Alias | Name | Enabled | GPG Check | Refresh | URI
--+-----------------------------+----------------------------------------------------------------------------+---------+-----------+---------+--------------------------------------------------------------------------------------------
1 | base | base | Yes | (r ) Yes | Yes | http://download.opensuse.org/distribution/leap/15.4/repo/oss
2 | debug | debug | Yes | (r ) Yes | No | http://download.opensuse.org/debug/distribution/leap/15.4/repo/oss
3 | debug-update | debug-update | Yes | (r ) Yes | No | http://download.opensuse.org/debug/update/leap/15.4/oss
4 | grommunio | grommunio | Yes | (r ) Yes | Yes | https://xxxxxxxxxxxxxxxx@download.grommunio.com/supported/openSUSE_Leap_15.4/?ssl_verify=no
5 | repo-backports-debug-update | repo-backports-debug-update | Yes | (r ) Yes | No | http://download.opensuse.org/update/leap/15.4/backports_debug/
6 | repo-backports-update | repo-backports-update | Yes | (r ) Yes | Yes | http://download.opensuse.org/update/leap/15.4/backports/
7 | repo-sle-debug-update | Update repository with debuginfo for updates from SUSE Linux Enterprise 15 | No | ---- | ---- | http://download.opensuse.org/debug/update/leap/15.4/sle/
8 | repo-sle-update | Update repository with updates from SUSE Linux Enterprise 15 | Yes | (r ) Yes | Yes | http://download.opensuse.org/update/leap/15.4/sle/
9 | update | update | Yes | (r ) Yes | Yes | http://download.opensuse.org/update/leap/15.4/ossvm3:~ # zypper --releasever=15.4 dup --download-in-heaps
Warning: Enforced setting: $releasever=15.4
Loading repository data...
Reading installed packages...
Warning: You are about to do a distribution upgrade with all enabled repositories. Make sure these repositories are compatible before you continue. See 'man zypper' for more information about this command.
Computing distribution upgrade...
3 Problems:
Problem: the to be installed gromox-2.0.10.6b64a7a-lp154.4.1.x86_64 requires 'php8-soap', but this requirement cannot be provided
Problem: the to be installed grommunio-sync-1.1.49-lp154.16.1.noarch requires 'php8-soap', but this requirement cannot be provided
Problem: the to be installed patterns-grommunio-1-lp154.8.1.x86_64 requires 'grommunio-web', but this requirement cannot be provided
Problem: the to be installed gromox-2.0.10.6b64a7a-lp154.4.1.x86_64 requires 'php8-soap', but this requirement cannot be provided
not installable providers: php8-soap-8.0.10-150400.2.7.x86_64[base]
php8-soap-8.0.10-150400.4.3.1.x86_64[repo-sle-update]
php8-soap-8.0.10-150400.4.8.1.x86_64[repo-sle-update]
php8-soap-8.0.24-150400.4.14.1.x86_64[repo-sle-update]
php8-soap-8.0.25-150400.4.17.1.x86_64[repo-sle-update]
php8-soap-8.0.25-150400.4.20.1.x86_64[repo-sle-update]
php8-soap-8.0.27-150400.4.23.1.x86_64[repo-sle-update]
Solution 1: Following actions will be done:
deinstallation of php7-smbclient-1.0.0-bp153.1.20.x86_64
deinstallation of php7-7.4.33-150200.3.46.2.x86_64
Solution 2: deinstallation of gromox-2.0.10.6b64a7a-lp153.4.1.x86_64
Solution 3: keep obsolete gromox-2.0.10.6b64a7a-lp153.4.1.x86_64
Solution 4: break gromox-2.0.10.6b64a7a-lp154.4.1.x86_64 by ignoring some of its dependencies
Choose from above solutions by number or skip, retry or cancel [1/2/3/4/s/r/c/d/?] (c):My versions
vm3:~ # rpm -qa |grep -E "(grommunio|gromox|mapi|libHX32|libexmdbpp|libfmt|libgumbo1|libpff1|libtinyxml|libvmime)" | sort
grommunio-admin-api-1.9.19.ffb31e8-lp153.9.1.noarch
grommunio-admin-common-6.cb985db-lp153.3.1.noarch
grommunio-admin-web-2.6.0.30.3a13674-lp153.5.1.noarch
grommunio-antispam-3.4-lp153.1.1.x86_64
grommunio-archive-1.3.12.g137.d1b0df1b-lp153.2.38.x86_64
grommunio-chat-6.2.2-lp153.2.1.x86_64
grommunio-common-10.e94d08a-lp153.5.1.x86_64
grommunio-cui-1.0.235.55d4960-lp153.9.1.noarch
grommunio-dav-1.1.32.71acf2d-lp153.8.1.noarch
grommunio-error-pages-1.0.6.9c50afb-lp153.3.1.noarch
grommunio-files-10.9.1-lp153.1.1.noarch
grommunio-imapsync-2.178-lp153.1.1.noarch
grommunio-index-0.1.15.d3ec048-lp153.4.1.x86_64
grommunio-office-7.0.0-lp153.1.8.x86_64
grommunio-office-fonts-7.0.0-lp153.1.8.noarch
grommunio-release-2022.05.2-lp153.2.1.x86_64
grommunio-setup-1.0.67.98c18be-lp153.5.1.noarch
grommunio-sync-1.1.49-lp153.16.1.noarch
grommunio-web-3.1.141.491f865-lp153.12.4.noarch
gromox-2.0.10.6b64a7a-lp153.4.1.x86_64
gromox-debuginfo-2.0.10.6b64a7a-lp153.4.1.x86_64
gromox-debugsource-2.0.10.6b64a7a-lp153.4.1.x86_64
grub2-theme-grommunio-1-lp153.11.4.noarch
jitsi-meet-branding-grommunio-2.0.6726-lp153.2.1.noarch
libHX32-4.8-lp153.2.1.x86_64
libexmdbpp0-1.10.0.3a4d93b-lp153.7.1.x86_64
libfmt7-7.1.3-bp153.1.17.x86_64
libfmt8-8.1.1-lp153.5.2.x86_64
libgumbo1-0.10.1-lp153.1.4.x86_64
libpff1-20211114-lp153.6.1.x86_64
libtinyxml2-9-9.0.0-lp153.3.1.x86_64
libvmime-suse5-0.9.2.175-lp153.13.1.x86_64
mapi-header-php-1.0.1.705eff3-lp153.2.1.noarch
patterns-grommunio-1-lp153.8.1.x86_64
plymouth-theme-grommunio-1-lp153.11.4.noarch
system-user-grommunio-2-lp153.11.1.noarch
system-user-gromox-2-lp153.13.1.noarch
systemd-presets-branding-grommunio-2022.12-lp153.1.1.noarch
Same to us - we also waiting for a stable time window in the supported channel to do the upgrade!
But every weekend we find new trouble and ending up in a not running appliance.
Here are our steps summary:
To fix the permanent warnings
The following 10 package updates will NOT be installed:
dracut-kiwi-lib dracut-kiwi-live dracut-kiwi-oem-dump dracut-kiwi-oem-repart kiwi-systemdeps-bootloaders kiwi-systemdeps-core kiwi-systemdeps-disk-images kiwi-systemdeps-filesystems kiwi-systemdeps-iso-media kiwi-tools
rpm -e dracut-kiwi-lib dracut-kiwi-live dracut-kiwi-oem-dump dracut-kiwi-oem-repart kiwi-systemdeps-bootloaders kiwi-systemdeps-core kiwi-systemdeps-disk-images kiwi-systemdeps-filesystems kiwi-systemdeps-iso-media kiwi-tools
Zypper refresh
zypper ref
Zypper update
zypper up
edit the repo files (replace 15.3 by 15.4)
sed -i "s/15.3/15.4/g" /etc/zypp/repos.d/base.repo
sed -i "s/15.3/15.4/g" /etc/zypp/repos.d/grommunio.repo
sed -i "s/15.3/15.4/g" /etc/zypp/repos.d/grommunio-base.repo
Opensuse Version Upgrade to 15.4
zypper --releasever=15.4 dup --download-in-heaps
The following just FYI - as most know i think :-)
Disable repository
zypper modifyrepo -d grommunio
Enable repository
zypper modifyrepo -e grommunio
Show the installed version
rpm -qa |grep -E "(grommunio|gromox|mapi|libHX32|libexmdbpp|libfmt|libgumbo1|libpff1|libtinyxml|libvmime)" | sort
Will be nice to get some comments how we can fix is in a short time !
ncoker If you have to to this: rpm -e dracut-kiwi-lib dracut-kiwi-live dracut-kiwi-oem-dump dracut-kiwi-oem-repart kiwi-systemdeps-bootloaders kiwi-systemdeps-core kiwi-systemdeps-disk-images kiwi-systemdeps-filesystems kiwi-systemdeps-iso-media kiwi-tools you have a very old installation. Yes, these packages are unused and needs to be removed.
WalterH If 2022.5.1 is very old, then yes. The packages came from the original applicance installation last year. I had to erase it too.
ncoker Here are our steps summary:
Thanks for your steps. After
ncoker zypper --releasever=15.4 dup --download-in-heaps
there is the error again, I've described in my post
I hope for any hints. At the moment I try to upgrade my test vm.
Thanks
Ulf
Im also very interested in this and wanted to ask this now.
It seems there are some strange problems since Christmas-Update. I also use the Appliance, since 2021 and always kept it up to date so far.
WalterH:
I also encountered this, but dont understand why it seems to be a problem to have an "old" installation like me. I always installed updates and everything. So it seems to be more of a problem of the update process?
I installed Christmas update but it always still says I have 2021.05.2 as said here. There seems to be something strange and I have the feeling I dont got all updates since then. For example: I still have the problem I described here, its not fixed for me.
So I dont know if this is all about wrong dependencies or the lack of the distribution upgrade until now - but would be happy if there is a solution soon.
Have you tried to setup a fresh ISO-Installation and just used your Backup?
I'm not done yet with all my Upgrade-Tests to 15.4 but i think this will just be my "Last-Resort" and it is always good to check if that is working anyhow 
.
I just did an ISO-Installation for tests this morning.
Only thing i had to do was an zypper modifyrepo --disable repo-backports-update and zypper in -y open-vm-tools so far. However i only use core and only test something else if i'm really bored....
I also opened an ticket because the OVA-Image does not align with the configured Repositorys in the ISO. Meaning that the OVA-Image sadly still uses a few 15.3 Repositorys.
For this "2021.05.2" the Package grommunio-release-$NUMBER is responsible to my knowledge.
What are your current Package-Versions?
rpm -qa *grom*